HTTP PROXY

Start simply. See clearly.

JustProxy is an HTTP proxy for iPhone. Start the proxy, enter its address and port in your client’s proxy settings, and view session traffic and recent connections in the app.

Get connected

  1. Connect your iPhone and client to a network that allows them to communicate. Personal Hotspot is optional; you can use the same Wi-Fi network.
  2. Open JustProxy and use Automatic or choose an available listening address.
  3. Tap the main power button to start the proxy.
  4. Enter the IP address shown in the app and port 8080 in your client’s HTTP proxy settings.
  5. Open the proxy address in your client’s browser for setup instructions tailored to that device.

Traffic and connections

The Traffic page shows total uploaded and downloaded bytes, along with the destination, port, and traffic for recent connections. Only requests forwarded through JustProxy count toward these statistics.

Connection troubleshooting

Check that the proxy is running, that the client uses the same IP and port as the app, and that the network allows communication between the devices. Some networks isolate devices, and cellular addresses may not be reachable by other devices. Check the listening address again after changing networks.

Background operation

Keep JustProxy in the foreground for sustained use. iOS may suspend or end the app in the background. Check the proxy status when returning to the app and start it again if needed.

Stop the proxy

Tap the main power button again to stop the proxy. Turn off the client’s manual proxy setting when finished. Provide proxy access only to devices you trust.

Contact support

When reporting an issue, include your iPhone model, iOS version, JustProxy version, and steps to reproduce it. Do not send passwords, tokens, or sensitive network content.

liyufeiat010@gmail.com

HTTP PROXY

简单开启,清楚查看。

JustProxy 是一款 iPhone HTTP 代理工具。开启代理后,将显示的地址和端口填入客户端的代理设置,即可转发请求,并在应用中查看会话流量和最近连接。

开始使用

  1. 将 iPhone 和客户端连接到可互通的网络。热点不是必需条件,也可以使用同一 Wi-Fi 网络。
  2. 打开 JustProxy,使用自动选择或选择一个可用的监听地址。
  3. 点击主界面的大按钮开启代理。
  4. 在客户端的 HTTP 代理设置中填写应用显示的 IP 地址和端口 8080。
  5. 在客户端浏览器中打开该代理地址,可查看适配当前设备的详细配置说明。

流量与连接

“流量”页面显示上传、下载的累计字节数,以及最近连接的目标、端口和流量。只有通过 JustProxy 转发的请求会计入这些统计。

连接不上时

确认代理处于运行状态,客户端填写的 IP 和端口与应用一致,并且两台设备之间允许网络通信。部分网络会隔离设备,蜂窝网络地址也不一定能被其他设备访问。切换网络后,请重新检查监听地址。

后台运行

使用时建议保持 JustProxy 在前台。iOS 可能在后台暂停或结束应用;返回应用后,请检查代理状态,必要时重新开启。

停止代理

再次点击主界面的大按钮即可关闭代理。使用结束后,也请关闭客户端的手动代理设置。请仅向信任的设备提供代理访问。

联系支持

如遇问题,请说明 iPhone 型号、iOS 版本、JustProxy 版本及复现步骤。请勿发送密码、令牌或敏感网络内容。

liyufeiat010@gmail.com